Sunday 22 December 2013

flashing micromax a110 flashing tutorial working


i m not responcible for any damages
do at your own risk


read all twice before flashing
til date i have flashed more then 10 times by this method
Make sure that you read everything carefully and know what you are doing.
Don't blame me for any damage that may occur on your phone.
-----------------------------------------------------------------------------------------
-do not disconnect mobile while flashing bettery must be more then 50%
-pc/laptop must not stop while flashing
-close other progames running in your pc/laptop for better speed-discoonect net
-images given here for learning purpose for better understanding of all steps
-you can practice till step 3 before all steps
-there is tutorial inside downloaded file by micromax do not use it(stictly -they given image for firmware upgread and you have to click download button)

---------------------------------------------------------------------------



What's needed:
1)USB data cable

its there with your chrgere right!!!
2)MediaTek USB VCOM drivers

-go to settings-developer option - click on usb debuging mode ok
-now connect your mobile with your pc/laptop and driver containg drive created open it and install your desire 32 bit or 64 bit driver(run as admin)
---restart your pc with phone connected

---to check is your driver instal or not go to usb teether option and apply it. if internet surfing is possible then you are ready to go---(must check)



3)SP Flash Tool and flashing files
-- is provided with in download file
-- 2 rar files
----make new folder and extract both files in new folder
--so threre is two folder one for sp flash tool and one containing all flashing files (warning =do not rename this folder)


--------------------------------------------------------------------------------------------------------------------
1)open spflsh tool

First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file

(here it is named MT6577_Android_scatter_emmc.txtfind in download file)

all files will be loded

2)choose Option-USB Model,click USB Model,
Choose Option- DownLoad All-Speed-High speed click High Speed


3)now connect your fone with micro usb data cable (do not connect to pc now just only fone side connect)
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
now fone is turn off with data cable coonect with fone side only


4) now do some speedy work

press download and connect immediatly to pc (same usb port when you use while instaling the driver)


The process will start and a red progress bar will appear.
After the red progress bar is complete(for 1 sec)


there will appear a purple progress bar(for1 sec
.
and thene yellow bar(for1 min to 5 min)

When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.


5)You can now safely disconnect your phone and turn it on. The process ends here


remove your mobile and start it will take 2 min to first boot
enjoy!!!!!!!!

-----------------------------------------------
download links
---------------------------------
what's new in updated stock v2:
Auto rotation sensor bit improved
- internal memory now increased to 1.58 ,rest is internal card 1.12 gb
- now u can install apps in external memory card default.
battery improve.
true colour.
GPS fix.
better performance.
now install pass on memory card.
and lots more finding.
updated smooth scrolling.
--------------------------------

in downloaded file you will get sp flash tool and flashing files
make new folder and extract all 2 rar files in new folder


for download see below link to post